Sea Water Nylon Filter Mesh Hight Tension 50-600 Micron Sea Water
Sea water nylon filter mesh introduction
Seawater exhibits an average salt content (salinity) of
approximately 35 per mill. However, in order to separate the water
from organic substances, such as algae or fine particles, the
seawater has to be pretreated. For this purpose, a fine filter is
installed between a coarse separator and the chemical or physical
disinfection unit. This removes microbial organism, mollusks and
plant formations along with suspended particulate, from the ballast
The criteria that apply to filter systems for seawater filtration
are challenging and manifold. Seawater filters have to
- Combine the required filter fineness with high flow rates and a
long service life.
- Comply with the required separation efficiency.
- Prevent the filter mesh from clogging despite the high load of
- Withstand the aggressive nature of seawater.
- Be easy to install, retrofit, operate and service.
- Require limited space.
- Contribute to keeping the operating costs of the system as low as
Nylon mesh specification
Our nylon mesh is food grade with FDA certification, no silican,
AZO free, 100% nylon material.
Choosing our nylon mesh is the best choice for your industry.
|Product name||sea water nylon mesh filtration|
|Aperture size||50-600 microns, and customized is available|
Width can be customized from 10-200cm, and longer
Length can be made accroding to your use
Sea water filtration Application
Seawater is often used to produce service and drinking water, as
well as for cooling purposes. They used in the following markets:
Desalination, Reverse Osmosis
Ship operation technology, Ballast Water, Cooling Systems, Gas
Oil and Gas, Water Injection
Municipal water treatment, UF Ultra Filtration, MF Membrane
Power & energy, make-up water, FGD, Scrubber, Screen Wash
Water, HVAC, Cooling Tower
Product detailed pictures